The offer of clamping devices Solmatic there are semi-automatic crimping machine type PT-52 and semi-automatic crimping machine for MDI type PT-52-MDI
The semi-automatic crimping machine is one of the basic devices in the production of aerosols, equipped with a replaceable crimping head and pneumatic supply. The device allows about 20 valves to be compressed per minute (actual speed depends on operator experience) and is mainly used in small scale production, in laboratories or test productions.
How does the device work? The pneumatic machine is started by a pedal or two buttons. Both the height and diameter of the clamp can be adjusted so that the clamp parameters correspond to those recommended by the valve manufacturer. The head rests on the can, in which the valve was previously placed, and then clamps it from the inside. At the end of the work cycle, the head returns to its original position. The crimping head works with both steel and aluminum aerosol valves.
The semi-automatic crimping machine is one of the basic devices in the production of aerosols in the MDI (Metered Dose Inhaler) technology. It is equipped with a replaceable crimping head and pneumatically powered. The device allows about 20 valves to be compressed per minute (actual speed depends on operator experience) and is mainly used in small scale production, in laboratories or test productions.
How does the device work? The pneumatic machine is started by a pedal or two buttons. The head lands on the MDI box, in which the valve was previously placed, and then clamps it on the box from the outside. At the end of the work cycle, the head returns to its original position. The crimping head works with both MDI steel and aluminum valves.
You get one hundred percent personalized, tailored technological solutions, comprehensive service and substantive support before, during and after the project.
By focusing on proven, automated solutions, you increase efficiency, quality and speed of production, reducing the risk of incurring losses during the production process resulting from defects and failures of equipment - thus you reduce costs. Automatic lines Solmatic are able to fill up to 120 cans per minute.
Our machines are characterized by a short changeover time, thanks to which you are able to maintain the smoothness and flexibility of the production process. With devices Solmatic you do not lose valuable time to change the machine - you produce more and do not generate unnecessary costs.
All machines Solmatic is covered by the warranty. We run an online warranty service, helping our customers remotely, no matter where they are. Our experts perform periodic inspections. We have a wide range of proven spare parts (if during the technical inspection it turns out that one of the parts should be replaced - we can perform such a service right away). Our representatives are present on the largest markets to be able to respond to customer needs on an ongoing basis.
